PIC18F65K80-E/MR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F65K80 |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | ECANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Number of ADC Channels | 11 |
| Number of SPI Channels | 1 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
PIC18F65K80-E/MR Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. Surface Mount is the way to mount it. It is available in the Tube package. A core processor of PIC is present in the device. Work should be performed at a temperature of -40°C~125°C TA. Its type of program memory is FLASH. 54 I/Os can be found on it. A component with the same part number as PIC18F65K80 can be compared to other similar components. QUAD is the position of its terminals on the board. This circuit consists of 64 terminationals. This electrical component is part of the PIC? XLP? 18K series. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 64 pins are required to construct this device. It has a total of 64 pins on it. The component is included in Microcontrollers. The devices have a memory size of 32kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 64MHz. There are currently 5 timers/counters set up on the system. PIC CPUs are included in this part. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. Using oscillator type Internal makes it work.
PIC18F65K80-E/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F65K80-E/MR Applications
There are a lot of Microchip Technology PIC18F65K80-E/MR Microcontroller applications.
- Digital TVs
- Embedded gateways
- Safety -airbags, automatic braking system (ABS)
- Vacuum cleaners
- Robots
- Dishwashers
- Smart instruments
- Telephone sets
- Aerospace navigation systems
- Electronic jamming systems
