PIC18F66J10-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F66J10 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 14 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F66J10-I/PT Overview
For space savings, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. In the package Tray, it is included. The device has a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. The device has 50 I/Os. Based on the PIC18F66J10 base part number, it can be compared with other components. QUAD is the position of its terminals on the board. 64 terminations are present in it. In the PIC? 18J series, this electrical component is found. The supply voltage of 2.5V allows for high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed with 64 pins. The method of Surface Mount is used to mount it. 64 pins are on it in total. In Microcontrollers, this component is included. In the device, there is a memory capacity of 64kB which may be used to store programs and data. At a frequency of 40MHz, it can achieve excellent efficiency. 5 timers/counters are in use. This part is part of the PIC family of CPUs. Using an oscillator type Internal, it operates.
PIC18F66J10-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F66J10-I/PT Applications
There are a lot of Microchip Technology PIC18F66J10-I/PT Microcontroller applications.
- Refrigerators
- Air fryers
- Nintendo
- Removable disks
- Oil and gas
- Heart rate monitors
- Digital TVs
- Tape drives
- Dialysis machines (performs function of liver)
- Automatic staplers
