PIC18F66K80-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F66K80 |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| Nominal Supply Current | 620μA |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | ECANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 11x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Address Bus Width | 8b |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 5 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F66K80-I/PT Overview
It is available in the 64-TQFP package for the benefit of saving space. Surface Mount is the way to mount it. It comes in the package?of a Tray. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. 54 I/Os can be found on it. Other components that are comparable to it have the base part number PIC18F66K80. The position of the device is QUAD at terminal. There are a total of 64 terminations in it. The PIC? XLP? 18K series contains this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed using 64 pins. A total of 64 pins are attached to it. The component is included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. Using a frequency of 64MHz, it is very efficient. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 3V. An oscillator of type Internal is used.
PIC18F66K80-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F66K80-I/PT Applications
There are a lot of Microchip Technology PIC18F66K80-I/PT Microcontroller applications.
- Equipment control
- Virtual reality VR robots
- Oil and gas
- Blood pressure monitors
- Process control devices
- Projectors
- Hand-held metering systems
- Heater/Fan
- Hearing aids
- Electronic jamming systems
