PIC18F6722T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F6722 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F6722T-I/PT Overview
There is an option to purchase it in the 64-TQFP package, which saves space. Surface Mount is the way to mount it. Tape & Reel (TR) is the package that contains it. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. 54 I/Os can be found on it. To find equivalent components, use its PIC18F6722 base part number. At QUAD, it has its terminals. It has 64 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. There are 64 pins used in the construction of this device. According to Surface Mount, it is mounted. Total number of pins is 64. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 128kB. A 5V source is used for powering it. The system is highly efficient when working at a frequency of 40MHz. Using 5V's adaptability as a supply voltage allows designers to maximize its use. There are currently 5 timers/counters set up on the system. It is part of the PIC CPU family. Using an oscillator type Internal, it operates.
PIC18F6722T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F6722T-I/PT Applications
There are a lot of Microchip Technology PIC18F6722T-I/PT Microcontroller applications.
- Coffee machines
- Magnetic resonance imaging (MRI)
- Leakage current tester
- Fire detection & safety devices
- X-ray
- Calculator
- Hand-held metering systems
- DCS control intelligent sensor
- Electronic jamming systems
- Sonography (Ultrasound imaging)
