PIC18F8310T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F8310 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 70 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 31.5mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 20 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
PIC18F8310T-I/PT Overview
There is an option to purchase it in the 80-TQFP package, which saves space. The way of mounting it is Surface Mount. It comes in the package?of a Tape & Reel (TR). A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 70 I/Os are available on this device. Based on the PIC18F8310 base part number, it can be compared with other components. The terminals of this device are located at QUAD. Currently, it consists of 80 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. The 5V supply voltage enables high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. It is constructed using 80 pins. A method of mounting is used, which is Surface Mount. In total, it has 80 pins. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 8kB. The maximum supply current is set at 31.5mA. A 5V source of power is being used to run it. It performs extremely well at a frequency of 40MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. In total, there are 4 timers and counters. It is a member of the PIC family of CPUs. An oscillator type Internal is required for it to work.
PIC18F8310T-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F8310T-I/PT Applications
There are a lot of Microchip Technology PIC18F8310T-I/PT Microcontroller applications.
- Heart rate monitors
- Heater/Fan
- Fax machines
- Speed meter
- Smartphones-calling, video calling, texting, email
- Hard drives
- Oil and gas
- Food and beverage
- Kindle
- Calculator
