PIC18F8527T-I/PT
| Parameters | |
|---|---|
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F8527 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 70 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Address Bus Width | 20 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
PIC18F8527T-I/PT Overview
For the purpose of saving space, it is available in the 80-TQFP package. This is mounted using the Surface Mount method. It comes in a Tape & Reel (TR) package. PIC core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 70 I/Os on the board. A component with the same part number as PIC18F8527 can be compared to other similar components. QUAD is the location of its terminals. Currently, it consists of 80 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 80 pins are required to construct this device. Based on the Surface Mount method, it is mounted. There are 80 pins on it. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 48kB. A 5V source is used for powering it. Working at a frequency of 40MHz results in excellent efficiency. The supply voltage of 5V's adaptability can be fully utilised by designers. It appears that there are 5 timers/counters in use. As part of the PIC CPU family, this component is included. An oscillator of type Internal is used.
PIC18F8527T-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F8527T-I/PT Applications
There are a lot of Microchip Technology PIC18F8527T-I/PT Microcontroller applications.
- Ipad
- Torpedo guidance
- Computed Tomography (CT scan)
- Playstation
- Christmas lights
- Washing machines
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Embedded gateways
- Virtual reality VR robots
- Coffee machines
