PIC18F8622T-I/PT
| Parameters | |
|---|---|
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Address Bus Width | 20 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F8622 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 70 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
PIC18F8622T-I/PT Overview
A space-saving advantage is that it is included in the 80-TQFP package. The way of Surface Mount is used to mount it. You can find it in the package of Tape & Reel (TR). There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. 70 I/Os have been provided by the device. It has a base part number of PIC18F8622 that can be used to find other components that are comparable. QUAD is the location of its terminals. This circuit consists of 80 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 80 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 80 pins in total. It belongs to the subcategory Microcontrollers. The devices have a maximum memory size of 64kB that can be used to store programs and data. A 5V source is used for powering it. This device achieves excellent efficiency at frequencies of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. The number of timers and counters is 5. The part is a part of the PIC CPU family. Using a Internal oscillator type, it works well.
PIC18F8622T-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F8622T-I/PT Applications
There are a lot of Microchip Technology PIC18F8622T-I/PT Microcontroller applications.
- Walkie talkies
- Light sensing & controlling devices
- Computer/laptop
- Mice
- DCS control intelligent sensor
- Copiers
- Home appliances
- Missile control
- Fax machines
- Toys
