PIC18F8627-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F8627 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 70 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 96KB 48K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Address Bus Width | 20 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F8627-E/PT Overview
Due to the benefits of saving space, it is available in the 80-TQFP package. Surface Mount is the way to mount it. Package Tray contains it. The device has a PIC core processor. Working at -40°C~125°C TA temperature is recommended. FLASH has been assigned to it as a program memory. The device has 70 I/Os. Other components that are comparable to it have the base part number PIC18F8627. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 80 terminations present. There are a number of electrical components in the PIC? 18F series, including this one. As a result of the 5V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed with 80 pins. It is mounted based on the method of Surface Mount. It is equipped with 80 pins in total. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 96kB. A 5V power source powers it. This device works well at 25MHz frequency when it is operating at a high rate of efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. A total of 5 timers/counters have been set up. PIC CPUs are included in this part. The oscillator type Internal is used to operate the device.
PIC18F8627-E/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F8627-E/PT Applications
There are a lot of Microchip Technology PIC18F8627-E/PT Microcontroller applications.
- Projector
- Ipod
- Automatic control
- Broadband technology, video and voice processing
- Radio
- Microwave ovens
- Paper shredders
- Light sensing & controlling devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Fax machines
