PIC18F86J11-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F86J11 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.6V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 3930 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 15x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of ADC Channels | 15 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F86J11-I/PT Overview
Due to the benefits of saving space, it is available in the 80-TQFP package. Surface Mount is the way to mount it. You can find it in the package of Tray. A PIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 68 I/Os on the board. Other components that are comparable to it have the base part number PIC18F86J11. At QUAD, its terminals are located. It has 80 terminationals. There are a number of electrical components in the PIC? 18J series, including this one. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 80 pins. This mount is done in accordance with the method of Surface Mount. There are 80 pins on it. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 64kB. The system is highly efficient when working at a frequency of 48MHz. While employing 3.6V, designers can maximize its supply voltage adaptability. A total of 5 timers/counters are present. The part is a part of the PIC CPU family. An oscillator of type Internal is used.
PIC18F86J11-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F86J11-I/PT Applications
There are a lot of Microchip Technology PIC18F86J11-I/PT Microcontroller applications.
- Scanners
- Copiers
- Current meter
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Firewalls
- Graphic terminals
- ECG machine
- Pacemakers (used to control abnormal heart rhythm)
- X-ray
- Volt meter
