PIC18F86J60-I/PT
| Parameters | |
|---|---|
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | Ethernet, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 15x10b |
| Watchdog Timer | Yes |
| Access Time | 42 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Number of ADC Channels | 15 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 41.667MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F86J60 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.6V |
| Interface | Ethernet, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 55 |
| RAM Size | 3808 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
PIC18F86J60-I/PT Overview
Due to the benefits of saving space, it is available in the 80-TQFP package. A Surface Mount mounting method is used. It comes in the package?of a Tray. PIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. There are 55 I/Os on the board. Other components that are comparable to it have the base part number PIC18F86J60. At QUAD, its terminals are located. It consists of 80 terminationals. PIC? 18J is the series number of this electrical component. By using a 2.5V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. 80 pins are used to construct it. A method of mounting is used, which is Surface Mount. Total number of pins is 80. The component is included in Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. This device works well at 41.667MHz frequency when it is operating at a high rate of efficiency. The supply voltage of 3.6V's adaptability can be fully utilised by designers. A total of 5 timers/counters have been set up. It is a member of the PIC family of CPUs. It works with an oscillator type Internal.
PIC18F86J60-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F86J60-I/PT Applications
There are a lot of Microchip Technology PIC18F86J60-I/PT Microcontroller applications.
- Laminators
- Measuring revolving objects
- Nintendo
- Tape drives
- Set-top boxes
- Industrial instrumentation devices
- Guidance-GPS
- Walkie talkies
- Petrochemical
- Answering machines
