PIC18F86J94-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F86J94 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 24x12b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 4 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F86J94-I/PT Overview
A space-saving advantage is that it is included in the 80-TQFP package. Mounted using Surface Mount. In the package Tray, it is included. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 68 I/Os on the board. Other components that are comparable to it have the base part number PIC18F86J94. A QUAD position is assigned to its terminals. 80 terminationals are present. There are a number of electrical components in the PIC? XLP? 18J series, including this one. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A number of 80 pins are used to construct it. Data and programs can be stored on the devices with a memory size of 64kB. The maximum supply current is set at 7mA. It is highly efficient when it works at a frequency of 64MHz. There are currently 4 timers/counters set up on the system. For normal operation, the supply voltage (Vsup) should be kept above 2V. Using an oscillator type of Internal, it works.
PIC18F86J94-I/PT Features
80-TQFP package
Mounting type of Surface Mount
PIC18F86J94-I/PT Applications
There are a lot of Microchip Technology PIC18F86J94-I/PT Microcontroller applications.
- Traditional industrial transformation
- Keyboards
- Fax machines
- Guidance-GPS
- Electronic jamming systems
- Laminators
- Smart instruments
- Television
- DDC control
- Oscilloscopes
