PIC18F87J10-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F87J10 |
| Pin Count | 80 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 66 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 15x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 15 |
| Number of PWM Channels | 14 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F87J10-I/PT Overview
It is available in the 80-TQFP package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 66 I/Os are present. A component with the same part number as PIC18F87J10 can be compared to other similar components. QUAD is the position of its terminals on the board. There are a total of 80 terminations in it. An electrical component such as this is included in the series PIC? 18J. Because the supply voltage is 2.5V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 80 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. There are 80 pins on it. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 128kB. The system is highly efficient when working at a frequency of 40MHz. A total of 5 timers/counters have been set up. This part is an integral part of the PIC CPU family. An oscillator of type Internal is used.
PIC18F87J10-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F87J10-I/PT Applications
There are a lot of Microchip Technology PIC18F87J10-I/PT Microcontroller applications.
- Fax machines
- Copiers
- Industrial robot
- Fabric
- Electromechanical control
- Smoke alarms
- Volt meter
- Broadband technology, video and voice processing
- Glucose monitoring systems (for Type 1 Diabetes)
- Computer/laptop
