PIC18F87J11-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F87J11 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.6V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 3930 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 15x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 15 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F87J11-I/PT Overview
As a result, it is available in the 80-TQFP package. A Surface Mount mounting method is used. There is a Tray package available for it. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. 68 I/Os can be found on it. In order to find similar components, it has a base part number of PIC18F87J11. At QUAD, its terminals are located. It consists of 80 terminationals. In the PIC? 18J series, this electrical component is found. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 80 pins are used. A method of mounting is used, which is Surface Mount. There are a total of 80 pins on it. This component is a part of Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. It is highly efficient when it works at a frequency of 48MHz. 3.6V offers full adaptability and voltage supply when it is employed by designers. 5 counters/timers are currently active. The part is a part of the PIC CPU family. Using an oscillator type Internal, it operates.
PIC18F87J11-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F87J11-I/PT Applications
There are a lot of Microchip Technology PIC18F87J11-I/PT Microcontroller applications.
- Industrial instrumentation devices
- Calculators
- Oscilloscopes
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
- DCS control intelligent sensor
- Graphic terminals
- Instrument control
- 3D printers
- Digital cameras
