PIC18F87J90-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F87J90 |
| Pin Count | 80 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 67 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Density | 1 Mb |
| ROM (words) | 65536 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F87J90-I/PT Overview
It is available in the 80-TQFP package for the benefit of saving space. This is mounted using the Surface Mount method. It comes in the package?of a Tray. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. There are 67 I/Os on it. Based on its base part number of PIC18F87J90, other similarly-sized components can be found. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 80 terminations present. An electrical component such as this is included in the series PIC? 18J. Using the 3.3V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed using 80 pins. Mounting is performed in accordance with Surface Mount. In total, it has 80 pins. The component is included in Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. At a frequency of 48MHz, it exhibits excellent efficiency. There are 4 timers/counters. PIC CPUs are included in this part. Using an oscillator type of Internal, it works.
PIC18F87J90-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F87J90-I/PT Applications
There are a lot of Microchip Technology PIC18F87J90-I/PT Microcontroller applications.
- Telephone sets
- X-ray
- Communication-bluetooth, Wi-Fi, radio
- Keyboards
- Volt meter
- Pacemakers (used to control abnormal heart rhythm)
- Fax machines
- DCS control intelligent sensor
- Sonography (Ultrasound imaging)
- Binding machines
