PIC18LF1220-I/P
| Parameters | |
|---|---|
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| Low Power Mode | YES |
| RAM (words) | 256 |
| Number of ADC Channels | 7 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 23.37mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF1220 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
PIC18LF1220-I/P Overview
For the purpose of saving space, it is available in the 18-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. Tube is the package that contains it. There is a PIC as core processor in this device. Work should be done at -40°C~85°C TA. FLASH is its program memory type. There are 16 I/Os on it. It has a base part number of PIC18LF1220 that can be used to find other components that are comparable. The terminals of this device are located at DUAL. 18 terminations are present in it. In the PIC? 18F series, this electrical component is found. The 5V supply voltage enables high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 18 pins. This mount is done in accordance with the method of Through Hole. 18 pins are on it in total. This component is a part of Microcontrollers. The devices have a memory size of 4kB that can be used to store programs and data. Power comes from a source of 2.5/5V. Using a frequency of 40MHz, it is very efficient. A total of 4 timers/counters are present. In order to maintain normal operation, Vsup must be above 2V. There is an oscillator type Internal used in this circuit.
PIC18LF1220-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF1220-I/P Applications
There are a lot of Microchip Technology PIC18LF1220-I/P Microcontroller applications.
- Robots
- Medical instruments chromatographs
- Fabric
- Dryers
- Torpedo guidance
- Set-top boxes
- DDC control
- Security systems
- Keyboards
- Smart highways (navigation, traffic control, information monitoring and car service)
