PIC18LF1230-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF1230 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF1230-I/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. There is a Tube package available for it. A core processor of PIC is present in the device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. The device has 16 I/Os. Based on the PIC18LF1230 base part number, it can be compared with other components. DUAL is the location of its terminals. In this case, there are 20 terminationals. PIC? 18F is the series number of this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 20 pins used in the construction of this device. The method of Surface Mount is used to mount it. It has a total of 20 pins on it. It falls under the category of Microcontrollers. The devices have a maximum memory size of 4kB that can be used to store programs and data. The maximum supply current is 40mA. The system is highly efficient when working at a frequency of 40MHz. A total of 2 timers/counters have been set up. It is one of the members of the CPU family PIC. A supply voltage (Vsup) above 2V is necessary for normal operation. It works with an oscillator type Internal.
PIC18LF1230-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF1230-I/SS Applications
There are a lot of Microchip Technology PIC18LF1230-I/SS Microcontroller applications.
- Coffee machines
- PDAs, game consoles
- Firewalls
- Telephone sets
- Volt meter
- Smoke alarms
- Instrument control
- Hard drives
- Television
- Laminators
