PIC18LF1320-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF1320 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Density | 64 kb |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| Low Power Mode | YES |
| RAM (words) | 256 |
| Number of Timers | 4 |
| Number of PWM Channels | 4 |
| On Chip Data RAM Width | 8 |
| Length | 22.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF1320-I/P Overview
It is available in the 18-DIP (0.300, 7.62mm) package for the benefit of saving space. Through Hole is the way to mount it. You can find it in the package of Tube. With a processor of PIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. 16 I/Os have been provided by the device. Other components that are comparable to it have the base part number PIC18LF1320. This device has terminals at DUAL. This circuit consists of 18 terminationals. In the PIC? 18F series, this electrical component is found. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 18 pins are used in its construction. As a result, it is mounted in accordance with Through Hole. Total number of pins is 18. It falls under the category of Microcontrollers. The devices have a maximum memory size of 8kB that can be used to store programs and data. In this case, 15mA represents the maximum current supply. Power comes from a source of 2.5/5V. Using a frequency of 40MHz, it is very efficient. Vsup should be kept above 2V for normal operation. Internal is the oscillator type it uses.
PIC18LF1320-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF1320-I/P Applications
There are a lot of Microchip Technology PIC18LF1320-I/P Microcontroller applications.
- Fax machines
- Fabric
- Entertainment-radios, CD players, televisions
- Washing machine
- Petrochemical
- Hand-held metering systems
- Tape drives
- DCS control intelligent sensor
- Switches
- Telephone sets
