PIC18LF1330-I/ML
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF1330 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 40mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
PIC18LF1330-I/ML Overview
It is available in the 28-VQFN Exposed Pad package for the benefit of saving space. This is mounted using the Surface Mount method. It is available in the Tube package. A PIC core processor powers the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 16I/Os. To find equivalent components, use its PIC18LF1330 base part number. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series PIC? 18F. By using a 3V voltage supply, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. 28 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. There are a total of 28 pins on it. Subcategory Microcontrollers includes this component. The devices have a maximum memory size of 8kB that can be used to store programs and data. The maximum supply current is set at 40mA. Working at a frequency of 40MHz results in excellent efficiency. In total, there are 2 timers and counters. This part is an integral part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 2V. An oscillator type Internal is required for it to work.
PIC18LF1330-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF1330-I/ML Applications
There are a lot of Microchip Technology PIC18LF1330-I/ML Microcontroller applications.
- Leakage current tester
- Industrial robot
- Sonography (Ultrasound imaging)
- Ipad
- Oscilloscopes
- Washing machines
- DCS control intelligent sensor
- Television
- Security systems
- Hearing aids
