PIC18LF13K22-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF13K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Density | 64 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF13K22-I/ML Overview
To save space, it is included in the 20-VFQFN Exposed Pad package. Mounted using Surface Mount. This item can be found in package Tube. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. A total of 17 I/Os are available on this device. A comparable component can be found by using the base part number PIC18LF13K22. The terminals of this device are located at QUAD. 20 terminationals are present. In the PIC? XLP? 18K series, this electrical component is found. It is possible to achieve high efficiency with a 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 20 pins are used. It is mounted based on the method of Surface Mount. It has a total of 20 pins on it. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 8kB. A 2/3.3V power source powers it. At a frequency of 64MHz, it exhibits excellent efficiency. This part is an integral part of the PIC CPU family. There are 18 programmable I/Os. Normally, the supply voltage (Vsup) should remain above 2.7V. There is an oscillator type Internal used in this circuit.
PIC18LF13K22-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF13K22-I/ML Applications
There are a lot of Microchip Technology PIC18LF13K22-I/ML Microcontroller applications.
- Blood pressure monitors
- Industrial instrumentation devices
- Fax machines
- Set-top boxes
- Walkie talkies
- Smartphones-calling, video calling, texting, email
- DCS control intelligent sensor
- Teletext terminals
- Heater/Fan
- Vacuum cleaners
