PIC18LF13K22-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF13K22 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| Density | 64 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF13K22-I/SS Overview
As a result, it is available in the 20-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. A package of Tube contains it. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. There are 17 I/Os on it, which makes it a very simple device. To find comparable components, use the PIC18LF13K22 base part number. The terminals of this device are set to DUAL. As far as terminations are concerned, there are 20 terminations present. There are a number of electrical components in the PIC? XLP? 18K series, including this one. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 20 pins are used to construct it. According to Surface Mount, it is mounted. This device has a total of 20 pins. In Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. There is 2/3.3V power source in this device. When working at a frequency of 64MHz it is able to achieve excellent efficiency. The number of timers and counters is 4. This part is an integral part of the PIC CPU family. There are a total of 18 programmable I/Os. During normal operation, the supply voltage (Vsup) should be kept above 2.7V. An oscillator of type Internal is used.
PIC18LF13K22-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF13K22-I/SS Applications
There are a lot of Microchip Technology PIC18LF13K22-I/SS Microcontroller applications.
- Temperature sensing and controlling devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Projector
- Torpedo guidance
- Industrial instrumentation devices
- Blenders
- Auto-breaking system
- Microwave ovens
- Fire detection & safety devices
- Glucose monitoring systems (for Type 1 Diabetes)
