PIC18LF2221-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2221 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 23mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2221-I/SP Overview
There is an option to purchase it in the 28-DIP (0.300, 7.62mm) package, which saves space. It is mounted using the way of Through Hole. It comes in a Tube package. A core processor of PIC is present in the device. Work should be done at -40°C~85°C TA. FLASH is its program memory type. There are 25 I/Os on the board. Based on its base part number of PIC18LF2221, other similarly-sized components can be found. The terminals of this device are set to DUAL. 28 terminationals are present. There are a number of electrical components in the PIC? 18F series, including this one. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Through Hole. On it, there are 28 pins. Microcontrollers contains this component. The devices have a memory size of 4kB that can be used to store programs and data. It is important to note that the maximum supply current is 23mA. There is a source of power of 2/5.5V that powers this device. It is highly efficient when it works at a frequency of 40MHz. The number of timers and counters is 4. It is a member of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC18LF2221-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2221-I/SP Applications
There are a lot of Microchip Technology PIC18LF2221-I/SP Microcontroller applications.
- Toys
- Digital cameras
- Process control devices
- Computer/laptop
- Robotic prosthetic limbs
- Walkie talkies
- Switches
- Hand-held metering systems
- Blenders
- Calculator
