PIC18LF2321T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2321 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 23mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2321T-I/ML Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tape & Reel (TR) package. A PIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 25 I/Os are present. Based on the PIC18LF2321 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. In this case, there are 28 terminationals. It is a member of the PIC? 18F series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. There are 28 pins used in the construction of this device. This mount is done in accordance with the method of Surface Mount. It has a total of 28 pins on it. In Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. The maximum supply current is 23mA. Powered by a 2/5.5V source. Using a frequency of 40MHz, it is very efficient. A total of 4 timers/counters have been set up. As part of the PIC CPU family, this component is included. Using oscillator type Internal makes it work.
PIC18LF2321T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2321T-I/ML Applications
There are a lot of Microchip Technology PIC18LF2321T-I/ML Microcontroller applications.
- DCS control intelligent sensor
- Toasters
- Electromechanical control
- Embedded gateways
- Auto-breaking system
- Fire alarms
- Automatic staplers
- Keyboards
- Microwave ovens
- Missile control
