PIC18LF2331-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2331 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 5 |
| Number of I2C Channels | 1 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF2331-I/SO Overview
There is a 28-SOIC (0.295, 7.50mm Width) package available to save space. Surface Mount is used for mounting. A package of Tube contains it. Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 24 I/Os on it. To find comparable components, use the PIC18LF2331 base part number. The position of the device is DUAL at terminal. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 28 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 28 pins are attached to it. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 8kB that can be used to store programs and data. Using a frequency of 40MHz, it is very efficient. A total of 4 timers/counters are present. This part is an integral part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 2V. Internal is the oscillator type it uses.
PIC18LF2331-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2331-I/SO Applications
There are a lot of Microchip Technology PIC18LF2331-I/SO Microcontroller applications.
- 3D printers
- Teletext terminals
- Home appliances
- Robots
- Graphic terminals
- Communication-bluetooth, Wi-Fi, radio
- Set-top boxes
- Digital TVs
- Equipment control
- Entertainment-radios, CD players, televisions
