PIC18LF2420-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2420 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of UART Channels | 1 |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2420-I/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. Package Tube contains it. A core processor of PIC is present in the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 25 I/Os on the board. To find comparable components, use the PIC18LF2420 base part number. At DUAL, its terminals are located. A 28 termination is contained within it. The electrical component is part of the series PIC? 18F. High efficiency is possible due to the 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 28 pins are used to construct it. Based on the Through Hole method, it is mounted. A total of 28 pins are attached to it. It is one of the components included in Microcontrollers. A device with a memory size of 16kB can store programs and data. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. There are 4 timers/counters. The part is a part of the PIC CPU family. It works with an oscillator type Internal.
PIC18LF2420-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2420-I/SP Applications
There are a lot of Microchip Technology PIC18LF2420-I/SP Microcontroller applications.
- Wastewater treatment
- Telephone sets
- Guidance-GPS
- Pacemakers (used to control abnormal heart rhythm)
- Microwave ovens
- DDC control
- Calculator
- Light sensing & controlling devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Embedded gateways
