PIC18LF2450-I/ML
| Parameters | |
|---|---|
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2450 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | RS-232, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
PIC18LF2450-I/ML Overview
As a result, it is available in the 28-VQFN Exposed Pad package. Using Surface Mount, it is mounted. A package of Tube contains it. A PIC core processor powers the device. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. There are 23 I/Os on the board. It has a part number of PIC18LF2450 that can be used to locate similar components. This device has terminals at QUAD. In this case, there are 28 terminationals. This electrical component is part of the PIC? 18F series. By using a 3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. The method of Surface Mount is used to mount it. This device has a total of 28 pins. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 16kB that can be used to store programs and data. A 2.5/5V power source powers it. The system is highly efficient when working at a frequency of 48MHz. There are 3 timers/counters. It is one of the members of the CPU family PIC. Vsup should be kept above 2V for normal operation. An oscillator type Internal is required for it to work.
PIC18LF2450-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2450-I/ML Applications
There are a lot of Microchip Technology PIC18LF2450-I/ML Microcontroller applications.
- Microwave ovens
- Process control devices
- Process control devices
- Fire detection & safety devices
- Computed Tomography (CT scan)
- Smoke alarms
- Xbox
- Instrument control
- Multi-meter
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
