PIC18LF2450-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 48MHz |
| Base Part Number | PIC18LF2450 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | RS-232, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2450-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. It is available in the Tube package. It is equipped with a PIC core processor. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. 23 I/Os can be found on it. A component with the same part number as PIC18LF2450 can be compared to other similar components. The terminals of this device are located at DUAL. 28 terminationals are present. PIC? 18F is the series number of this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. It is mounted based on the method of Through Hole. Total number of pins is 28. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 16kB. It is powered by a 2.5/5V?source. When working at a frequency of 48MHz it is able to achieve excellent efficiency. It appears that there are 3 timers/counters in use. This part is an integral part of the PIC CPU family. A supply voltage (Vsup) above 2V is necessary for normal operation. Internal is the oscillator type it uses.
PIC18LF2450-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2450-I/SP Applications
There are a lot of Microchip Technology PIC18LF2450-I/SP Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Hand-held metering systems
- Home appliances
- Ipad
- X-ray
- Food and beverage
- Christmas lights
- Mice
- Keyboards
