PIC18LF2480-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2480 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2480-I/ML Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in the package?of a Tube. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 25 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number PIC18LF2480. The position of the device is QUAD at terminal. 28 terminationals are present. This electrical component is part of the PIC? 18F series. Because of the 2.5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed with 28 pins. It is mounted based on the method of Surface Mount. On it, there are 28 pins. In Microcontrollers, this component is included. Using the devices' 16kB memory size, you can store programs and data. Powered by a 2.5/5V source. It is highly efficient when it works at a frequency of 40MHz. There are currently 4 timers/counters set up on the system. As part of the PIC CPU family, this component is included. Normal operation requires a supply voltage (Vsup) that is higher than 2V. It works with an oscillator type Internal.
PIC18LF2480-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2480-I/ML Applications
There are a lot of Microchip Technology PIC18LF2480-I/ML Microcontroller applications.
- Data acquisition and control
- Scanners
- Heart rate monitors
- Broadband technology, video and voice processing
- Mobile computers
- Digital cameras
- Accu-check
- Hand-held metering systems
- Wastewater treatment
- Calculators
