PIC18LF2480T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2480 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2480T-I/SO Overview
There is a 28-SOIC (0.295, 7.50mm Width) package available to save space. It is mounted using the way of Surface Mount. You can find it in the package of Tape & Reel (TR). It is equipped with a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 25 I/Os. A comparable component can be found by using the base part number PIC18LF2480. At DUAL, its terminals are located. There are a total of 28 terminations in it. It is a member of the PIC? 18F series of electrical components. As a result of the 2.5V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 28 pins are required to construct this device. During the mounting process, the device is mounted based on the Surface Mount method. On it, there are 28 pins. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 16kB. A 2.5/5V source of power is being used to run it. It is highly efficient when it works at a frequency of 40MHz. There are 4 timers/counters. It is a member of the PIC family of CPUs. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2V. Using an oscillator type Internal, it operates.
PIC18LF2480T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2480T-I/SO Applications
There are a lot of Microchip Technology PIC18LF2480T-I/SO Microcontroller applications.
- Projector
- Teletext terminals
- Ipod
- 3D printers
- Heart rate monitors
- Measuring revolving objects
- Calculator
- Robotic prosthetic limbs
- Refrigerators
- Scanners
