PIC18LF24J50-I/SS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF24J50 |
| Pin Count | 28 |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 128 kb |
| CPU Family | PIC |
| Number of ADC Channels | 10 |
| Number of SPI Channels | 2 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18LF24J50-I/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Surface Mount is used for mounting. This item can be found in package Tube. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. It has a number of 16I/Os. It has a part number of PIC18LF24J50 that can be used to locate similar components. This device has terminals at DUAL. As far as terminations are concerned, there are 28 terminations present. In the PIC? XLP? 18J series, this electrical component is found. Because of the 2.5V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. For its construction, 28 pins are used. It is mounted based on the method of Surface Mount. In total, it has 28 pins. Subcategory Microcontrollers includes this component. Using the devices' 16kB memory size, you can store programs and data. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. 5 counters/timers are currently active. As part of the PIC CPU family, this component is included. Using an oscillator type of Internal, it works.
PIC18LF24J50-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF24J50-I/SS Applications
There are a lot of Microchip Technology PIC18LF24J50-I/SS Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Washing machine
- Guidance-GPS
- Electromechanical control
- Keyboards
- Missile control
- Christmas lights
- Digital set-top boxes
- Multi-meter
- Fire detection & safety devices
