PIC18LF2510T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2510 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
PIC18LF2510T-I/ML Overview
There is a 28-VQFN Exposed Pad package available to save space. Surface Mount is used for mounting. Tape & Reel (TR) is the package that contains it. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 25 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number PIC18LF2510. At QUAD, its terminals are located. A 28 termination is contained within it. The PIC? 18F series contains this electrical component. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 28 pins. A method of mounting is used, which is Surface Mount. It is equipped with 28 pins in total. The component is included in Microcontrollers. In the device, there is a memory capacity of 32kB which may be used to store programs and data. Powered by a 2.5/5V source. The system is highly efficient when working at a frequency of 40MHz. A total of 4 timers/counters are present. This part is an integral part of the PIC CPU family. Using a Internal oscillator type, it works well.
PIC18LF2510T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2510T-I/ML Applications
There are a lot of Microchip Technology PIC18LF2510T-I/ML Microcontroller applications.
- Safety -airbags, automatic braking system (ABS)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Robots
- Magnetic resonance imaging (MRI)
- Fabric
- Electromechanical control
- Current meter
- Communication-bluetooth, Wi-Fi, radio
- Blenders
- Aerospace navigation systems
