PIC18LF252T-I/SO
| Parameters | |
|---|---|
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 25mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF252 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | External |
| Number of I/O | 23 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
PIC18LF252T-I/SO Overview
For the purpose of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. This is mounted using the Surface Mount method. Tape & Reel (TR) is the package that contains it. Device with PIC core processor issupported. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. 23 I/Os are present on the device. To find comparable components, use the PIC18LF252 base part number. The position of the device is DUAL at terminal. In this case, there are 28 terminationals. The electrical component is part of the series PIC? 18F. Because of the 4.5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 28 pins are used in its construction. There are 28 pins on it. Subcategory Microcontrollers includes this component. Memory size for the devices is 32kB, which can be used to store programs and data. Supply current is maximum at 25mA. There is 2.5/5V power source in this device. This device achieves excellent efficiency at frequencies of 40MHz. 4 counters/timers are currently active. The part is a part of the PIC CPU family. Vsup should be kept above 2V for normal operation. The oscillator type External is used to operate the device.
PIC18LF252T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF252T-I/SO Applications
There are a lot of Microchip Technology PIC18LF252T-I/SO Microcontroller applications.
- Projector
- Wastewater treatment
- Glucose monitoring systems (for Type 1 Diabetes)
- Smartphones-calling, video calling, texting, email
- Dryers
- Electronic jamming systems
- Volt meter
- Torpedo guidance
- Data acquisition and control
- Projectors
