PIC18LF25K50-I/SO
| Parameters | |
|---|---|
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 14 |
| Number of I2C Channels | 3 |
| Number of USB Channels | 1 |
| Height | 2.05mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF25K50 |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| Nominal Supply Current | 1.8mA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
PIC18LF25K50-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. It comes in a Tube package. The device has a PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. 25 I/Os have been provided by the device. Based on its base part number of PIC18LF25K50, other similarly-sized components can be found. At DUAL, it has its terminals. It has 28 terminationals. In the PIC? XLP? 18K series, this electrical component is found. The 3V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. For its construction, 28 pins are used. It falls under the category of Microcontrollers. Using the devices' 32kB memory size, you can store programs and data. At a frequency of 48MHz, it exhibits excellent efficiency. 4 timers/counters are in use. It is part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 2.7V. There is an oscillator type Internal used in this circuit.
PIC18LF25K50-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF25K50-I/SO Applications
There are a lot of Microchip Technology PIC18LF25K50-I/SO Microcontroller applications.
- Answering machines
- Scanners
- DCS control intelligent sensor
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hand-held metering systems
- Guidance-GPS
- X-ray
- Medical instruments chromatographs
- Oil and gas
- Aerospace navigation systems
