PIC18LF2680T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2680 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2680T-I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. Tape & Reel (TR) is the package that contains it. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. 25 I/Os can be found on it. It has a base part number of PIC18LF2680 that can be used to find other components that are comparable. DUAL is the position of its terminals on the board. This circuit consists of 28 terminationals. PIC? 18F is the series number of this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 28 pins. Based on the Surface Mount method, it is mounted. A total of 28 pins are attached to it. In Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 64kB. Power comes from a source of 2.5/5V. This device achieves excellent efficiency at frequencies of 40MHz. A total of 4 timers/counters are present. The part is a part of the PIC CPU family. An oscillator of type Internal is used.
PIC18LF2680T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2680T-I/SO Applications
There are a lot of Microchip Technology PIC18LF2680T-I/SO Microcontroller applications.
- X-ray
- Computers and laptops-video calling, email, blogging
- Measuring revolving objects
- Keyboards
- Microwave ovens
- DCS control intelligent sensor
- Traditional industrial transformation
- Broadband technology, video and voice processing
- Fire detection & safety devices
- Smartphones-calling, video calling, texting, email
