PIC18LF2682-I/SO
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2682 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 80kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 80KB 40K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
PIC18LF2682-I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is the way to mount it. In the package Tube, it is included. A core processor of PIC is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. There are 25 I/Os on the board. To find equivalent components, use its PIC18LF2682 base part number. At DUAL, its terminals are located. 28 terminations are present in it. The PIC? 18F series includes this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A number of 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It has a total of 28 pins on it. Subcategory Microcontrollers includes this component. Memory size for the devices is 80kB, which can be used to store programs and data. Powered by a 2.5/5V source. It is highly efficient when it works at a frequency of 40MHz. A total of 4 timers/counters have been set up. The part is a part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC18LF2682-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2682-I/SO Applications
There are a lot of Microchip Technology PIC18LF2682-I/SO Microcontroller applications.
- Broadband technology, video and voice processing
- Multi-meter
- Hard drives
- Smartphones-calling, video calling, texting, email
- Fax machines
- DCS control intelligent sensor
- Routers
- Magnetic resonance imaging (MRI)
- Fire detection & safety devices
- Home video and audio
