PIC18LF2685-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF2685 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 96KB 48K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2685-I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. It comes in the package?of a Tube. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. It has a number of 25I/Os. It has a base part number of PIC18LF2685 that can be used to find other components that are comparable. The terminals of this device are located at DUAL. A 28 termination is contained within it. There are a number of electrical components in the PIC? 18F series, including this one. The 5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. The mounting of this device is carried out following the method of Surface Mount. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. A device with a memory size of 96kB can store programs and data. There is a source of power of 2.5/5V that powers this device. It is highly efficient when it works at a frequency of 40MHz. 4 timer/counters are present. PIC CPUs are included in this part. Using oscillator type Internal makes it work.
PIC18LF2685-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF2685-I/SO Applications
There are a lot of Microchip Technology PIC18LF2685-I/SO Microcontroller applications.
- Oscilloscopes
- Smoke alarms
- Calculator
- Computers and laptops-video calling, email, blogging
- DCS control intelligent sensor
- Current meter
- Dialysis machines (performs function of liver)
- Home video and audio
- PDAs, game consoles
- Microwave ovens
