PIC18LF2685-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2685 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 96KB 48K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2685-I/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. There is a Tube package available for it. The device has a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 25 I/Os on the board. Based on the PIC18LF2685 base part number, it can be compared with other components. The terminals are positioned at DUAL. A 28 termination is contained within it. The PIC? 18F series contains this electrical component. High efficiency is possible due to the 3V supply voltage. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. A method of mounting is used, which is Through Hole. There are 28 pins on it. Microcontrollers contains this component. Using the devices' 96kB memory size, you can store programs and data. Power comes from a source of 2.5/5V. When working at a frequency of 40MHz it is able to achieve excellent efficiency. 4 timers/counters are in use. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) that is higher than 2V. It works with an oscillator type Internal.
PIC18LF2685-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2685-I/SP Applications
There are a lot of Microchip Technology PIC18LF2685-I/SP Microcontroller applications.
- Firewalls
- Playstation
- Guidance-GPS
- Instrument control
- Fire detection & safety devices
- Removable disks
- Ipod
- Nintendo
- Computers and laptops-video calling, email, blogging
- Safety -airbags, automatic braking system (ABS)
