PIC18LF26J11-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF26J11 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18LF26J11-I/ML Overview
To save space, it is included in the 28-VQFN Exposed Pad package. Surface Mount is the way to mount it. You can find it in the package of Tube. Devices with PIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. 16 I/Os are present on the device. A comparable component can be found by using the base part number PIC18LF26J11. The terminals of this device are set to QUAD. Currently, it consists of 28 terminationals. Part of the PIC? XLP? 18J series, this electrical component is used in a variety of applications. By using a 3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is constructed from 28 pins. According to Surface Mount, it is mounted. There are a total of 28 pins on it. It belongs to the subcategory Microcontrollers. A device with a memory size of 64kB can store programs and data. This device achieves excellent efficiency at frequencies of 48MHz. 5 timers/counters are in use. It belongs to the PIC CPU family. Vsup should be kept above 2V for normal operation. The oscillator type Internal is used to operate the device.
PIC18LF26J11-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF26J11-I/ML Applications
There are a lot of Microchip Technology PIC18LF26J11-I/ML Microcontroller applications.
- Answering machines
- Smart highways (navigation, traffic control, information monitoring and car service)
- Oil and gas
- Laminators
- Dialysis machines (performs function of liver)
- Teletext terminals
- Microwave ovens
- Ipod
- Guidance-GPS
- Electromechanical control
