PIC18LF26J50-I/ML
| Parameters | |
|---|---|
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF26J50 |
| Pin Count | 28 |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
PIC18LF26J50-I/ML Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. Device with PIC core processor issupported. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 16 I/Os are present on the device. A comparable component can be found by using the base part number PIC18LF26J50. A QUAD position is assigned to its terminals. It has 28 terminationals. This electrical component is part of the PIC? XLP? 18J series. Because of the 2.5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. There are a total of 28 pins on it. In Microcontrollers, this component is included. The devices have a memory size of 64kB that can be used to store programs and data. At a frequency of 48MHz, it can achieve excellent efficiency. 5 counters/timers are currently active. It is a member of the PIC family of CPUs. Internal is the oscillator type it uses.
PIC18LF26J50-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF26J50-I/ML Applications
There are a lot of Microchip Technology PIC18LF26J50-I/ML Microcontroller applications.
- Hard drives
- Torpedo guidance
- Laminators
- Graphic terminals
- Tape drives
- Food and beverage
- Home video and audio
- Robots
- Pacemakers (used to control abnormal heart rhythm)
- Microwave ovens
