PIC18LF26J53-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Base Part Number | PIC18LF26J53 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~2.75V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 15.1mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 8.509mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF26J53-I/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. A package of Tube contains it. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. It has a number of 22I/Os. Based on its base part number of PIC18LF26J53, other similarly-sized components can be found. A DUAL position is assigned to its terminals. 28 terminationals are present. This electrical component is part of the PIC? XLP? 18J series. Using the 2.5V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. 28 pins are on it in total. The component is included in Microcontrollers. Using the devices' 64kB memory size, you can store programs and data. The maximum supply current is set at 15.1mA. At a frequency of 48MHz, it exhibits excellent efficiency. 8 timer/counters are present. It is one of the members of the CPU family PIC. The number 3 represents the number of programmable I/O ports on the board. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. The oscillator type Internal is used to operate the device.
PIC18LF26J53-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF26J53-I/SP Applications
There are a lot of Microchip Technology PIC18LF26J53-I/SP Microcontroller applications.
- Calculator
- Blenders
- Washing machines
- DCS control intelligent sensor
- Fax machines
- Computer/laptop
- Microwave ovens
- Telephone sets
- Binding machines
- Computed Tomography (CT scan)
