PIC18LF27J53-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF27J53 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~2.75V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 15.1mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18LF27J53-I/ML Overview
It is available in the 28-VQFN Exposed Pad package for the benefit of saving space. The way of mounting it is Surface Mount. In the package Tube, it is included. With a processor of PIC cores, the device is powered. Maintain a temperature of -40°C~85°C TA while working. Its type of program memory is FLASH. A total of 22 I/Os are available on this device. Based on the PIC18LF27J53 base part number, it can be compared with other components. The terminals of this device are set to QUAD. A 28 termination is contained within it. This electrical component is part of the PIC? XLP? 18J series. By using a 2.5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. 28 pins are used to construct it. There are a total of 28 pins on it. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 128kB. In this case, 15.1mA represents the maximum current supply. It is highly efficient when it works at a frequency of 48MHz. A total of 8 timers/counters are present. As part of the PIC CPU family, this component is included. A chip with 3 programmable inputs/outputs is available. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. The oscillator type Internal is used to operate the device.
PIC18LF27J53-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF27J53-I/ML Applications
There are a lot of Microchip Technology PIC18LF27J53-I/ML Microcontroller applications.
- Microwave ovens
- 3D printers
- Pacemakers (used to control abnormal heart rhythm)
- Blood pressure monitors
- Data acquisition and control
- Entertainment products
- Broadband technology, video and voice processing
- Guidance-GPS
- Routers
- Microwave ovens
