PIC18LF4331-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF4331 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF4331-I/P Overview
It is available in the 40-DIP (0.600, 15.24mm) package for the benefit of saving space. The way of Through Hole is used to mount it. Package Tube contains it. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. There are 36 I/Os on it, which makes it a very simple device. It has a base part number of PIC18LF4331 that can be used to find other components that are comparable. The terminals of this device are set to DUAL. It has 40 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 40 pins are used. The mounting of this device is carried out following the method of Through Hole. There are 40 pins on it. In Microcontrollers, this component is included. In the device, there is a memory capacity of 8kB which may be used to store programs and data. In this case, 15mA represents the maximum current supply. Powered by a 2.5/5V source. Working at a frequency of 40MHz results in excellent efficiency. 4 timer/counters are present. PIC CPUs are included in this part. In order to maintain normal operation, Vsup must be above 2V. Using a Internal oscillator type, it works well.
PIC18LF4331-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF4331-I/P Applications
There are a lot of Microchip Technology PIC18LF4331-I/P Microcontroller applications.
- Answering machines
- Washing machines
- Magnetic resonance imaging (MRI)
- Smart instruments
- Binding machines
- Projectors
- Washing machine
- Smart highways (navigation, traffic control, information monitoring and car service)
- Electromechanical control
- Torpedo guidance
