PIC18LF4331-I/PT
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF4331 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
PIC18LF4331-I/PT Overview
As a result, it is available in the 44-TQFP package. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. A total of 36 I/Os are present. Based on the PIC18LF4331 base part number, it can be compared with other components. The terminals of this device are set to QUAD. It has 44 terminationals. The PIC? 18F series contains this electrical component. By using a 5V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is composed of 44 pins. The method of Surface Mount is used to mount it. It is equipped with 44 pins in total. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 8kB that can be used to store programs and data. Supply current cannot exceed 15mA. Powered by a 2.5/5V source. Using a frequency of 40MHz, it is very efficient. There are currently 4 timers/counters set up on the system. This part is an integral part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 2V. Using a Internal oscillator type, it works well.
PIC18LF4331-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF4331-I/PT Applications
There are a lot of Microchip Technology PIC18LF4331-I/PT Microcontroller applications.
- Electronic jamming systems
- Washing machine
- Air fryers
- DDC control
- Microwave ovens
- Fabric
- Robots
- Instrument control
- Equipment control
- Leakage current tester
