PIC18LF442-I/P
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF442 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 34 |
| RAM Size | 768 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 25mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® 18F |
PIC18LF442-I/P Overview
As a result, it is available in the 40-DIP (0.600, 15.24mm) package. The way of mounting it is Through Hole. Package Tube contains it. The device runs in PIC core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. A total of 34 I/Os are available on this device. Based on its base part number of PIC18LF442, other similarly-sized components can be found. DUAL is the position of its terminals on the board. 40 terminations are present in it. The electrical component is part of the series PIC? 18F. As a result of the 4.5V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 40 pins are used to construct it. It is equipped with 40 pins in total. In Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 16kB. The maximum supply current is 25mA. A 2.5/5V source of power is being used to run it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. A total of 4 timers/counters have been set up. PIC CPUs are included in this part. Vsup should be kept above 2V for normal operation. An oscillator of type External is used.
PIC18LF442-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF442-I/P Applications
There are a lot of Microchip Technology PIC18LF442-I/P Microcontroller applications.
- Security systems
- Gas monitoring systems
- Dryers
- Heater/Fan
- Automatic control
- Ipod
- Digital TVs
- Coffee machines
- Robots
- Toys
