PIC18LF4550-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF4550 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Supply Current-Max | 50mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF4550-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. The way of Surface Mount is used to mount it. In the package Tube, it is included. With a processor of PIC cores, the device is powered. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 35 I/Os are available on this device. It has a base part number of PIC18LF4550 that can be used to find other components that are comparable. At QUAD, its terminals are located. As far as terminations are concerned, there are 44 terminations present. In the PIC? 18F series, this electrical component is found. Because of the 5V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. There are 44 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. 44 pins are on it in total. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 32kB. Supply current is maximum at 50mA. Using a frequency of 48MHz, it is very efficient. A total of 4 timers/counters have been set up. PIC CPUs are included in this part. There is an oscillator type Internal used in this circuit.
PIC18LF4550-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF4550-I/ML Applications
There are a lot of Microchip Technology PIC18LF4550-I/ML Microcontroller applications.
- Radio
- Light sensing & controlling devices
- Safety -airbags, automatic braking system (ABS)
- Traditional industrial transformation
- Process control devices
- Binding machines
- Data acquisition and control
- Fabric
- Guidance-GPS
- Wastewater treatment
