PIC18LF4550-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 48MHz |
| Base Part Number | PIC18LF4550 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Supply Current-Max | 50mA |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 53.21mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF4550-I/P Overview
Due to the benefits of saving space, it is available in the 40-DIP (0.600, 15.24mm) package. Through Hole is the way to mount it. This item can be found in package Tube. The device has a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 35 I/Os on it, which makes it a very simple device. It has a part number of PIC18LF4550 that can be used to locate similar components. At DUAL, it has its terminals. It has 40 terminationals. It is a member of the PIC? 18F series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A number of 40 pins are used to construct it. This mount is done in accordance with the method of Through Hole. In total, it has 40 pins. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 32kB. It should be noted that 50mA represents the maximum supply current. Power is provided by a 2.5/5V source. Using a frequency of 48MHz, it is very efficient. There are currently 4 timers/counters set up on the system. It is a member of the PIC family of CPUs. An oscillator of type Internal is used.
PIC18LF4550-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF4550-I/P Applications
There are a lot of Microchip Technology PIC18LF4550-I/P Microcontroller applications.
- Smoke alarms
- 3D printers
- Digital set-top boxes
- Set-top boxes
- Routers
- Air fryers
- Oil and gas
- Oscilloscopes
- Information appliances (networking of household appliances)
- Industrial instrumentation devices
