PIC18LF4550-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF4550 |
| Pin Count | 44 |
| Lead Pitch | 500μm |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 580μA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Access Time | 48 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| Density | 256 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 5 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF4550-I/PT Overview
As a result, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. There is a Tray package available for it. The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. There are 35 I/Os on the board. A comparable component can be found by using the base part number PIC18LF4550. This device has terminals at QUAD. In this case, there are 44 terminationals. Part of the PIC? 18F series, this electrical component is used in a variety of applications. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. 44 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 44 pins are attached to it. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 32kB. It is highly efficient when it works at a frequency of 48MHz. A total of 4 timers/counters are present. It belongs to the PIC CPU family. The oscillator type Internal is used to operate the device.
PIC18LF4550-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF4550-I/PT Applications
There are a lot of Microchip Technology PIC18LF4550-I/PT Microcontroller applications.
- Robotic prosthetic limbs
- Medical instruments chromatographs
- Blood pressure monitors
- Tape drives
- Gas monitoring systems
- Virtual reality VR robots
- Missile control
- Communication-bluetooth, Wi-Fi, radio
- Information appliances (networking of household appliances)
- Torpedo guidance
