PIC18LF4580-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF4580 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF4580-I/ML Overview
Due to its space-saving qualities, it is available in the 44-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. You can find it in the package of Tube. It is equipped with a PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. It has a number of 36I/Os. A comparable component can be found by using the base part number PIC18LF4580. The terminals are positioned at QUAD. There are a total of 44 terminations in it. An electrical component such as this is included in the series PIC? 18F. High efficiency is possible due to the 2.5V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed with 44 pins. This mount is done in accordance with the method of Surface Mount. In total, it has 44 pins. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 32kB. A 2.5/5V source is used for powering it. The system is highly efficient when working at a frequency of 40MHz. There are currently 4 timers/counters set up on the system. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 2V. Internal is the oscillator type it uses.
PIC18LF4580-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF4580-I/ML Applications
There are a lot of Microchip Technology PIC18LF4580-I/ML Microcontroller applications.
- Graphic terminals
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hard drives
- Current meter
- Vacuum cleaners
- Mobile computers
- Multi-meter
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Torpedo guidance
- Information appliances (networking of household appliances)
