PIC18LF4585T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF4585 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF4585T-I/PT Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. It is available in the Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. There are 36 I/Os on the board. A comparable component can be found by using the base part number PIC18LF4585. The terminals of this device are located at QUAD. It has 44 terminationals. An electrical component such as this is included in the series PIC? 18F. It is possible to achieve high efficiency with a 5V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. The method of Surface Mount is used to mount it. On it, there are 44 pins. This is a component included in Microcontrollers. In the device, there is a memory capacity of 48kB which may be used to store programs and data. A 2.5/5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 40MHz. A total of 4 timers/counters are present. It belongs to the PIC CPU family. Using an oscillator type Internal, it operates.
PIC18LF4585T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF4585T-I/PT Applications
There are a lot of Microchip Technology PIC18LF4585T-I/PT Microcontroller applications.
- Microwave ovens
- Computer/laptop
- Guidance-GPS
- Data acquisition and control
- Entertainment products
- Removable disks
- Refrigerators
- Instrument control
- Scanners
- Coffee machines
