PIC18LF45J11-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF45J11 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 256 kb |
| ROM (words) | 16384 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 22 |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18LF45J11-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. It is mounted using the way of Surface Mount. It comes in a Tube package. With a processor of PIC cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 34 I/Os on it. It has a part number of PIC18LF45J11 that can be used to locate similar components. The terminals are positioned at QUAD. 44 terminationals are present. This electrical component is part of the PIC? XLP? 18J series. It is possible to achieve high efficiency with a 3V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 44 pins are used in its construction. Based on the Surface Mount method, it is mounted. Total number of pins is 44. It is one of the components included in Microcontrollers. In order to store data and programs, the devices have a memory size of 32kB. Using a frequency of 48MHz, it is very efficient. 5 timers/counters are in use. This part is an integral part of the PIC CPU family. There are a total of 22 programmable I/Os available. Normally, the supply voltage (Vsup) should remain above 2V. Internal is the oscillator type it uses.
PIC18LF45J11-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF45J11-I/ML Applications
There are a lot of Microchip Technology PIC18LF45J11-I/ML Microcontroller applications.
- Laminators
- Calculators
- Security systems
- Calculator
- Embedded gateways
- DCS control intelligent sensor
- Electronic jamming systems
- Computers and laptops-video calling, email, blogging
- Fax machines
- Communication-bluetooth, Wi-Fi, radio
