PIC18LF45K22-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 64MHz |
| Base Part Number | PIC18LF45K22 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 30x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 7 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 2 |
| Number of Programmable I/O | 36 |
| Number of ADC Channels | 30 |
| Number of PWM Channels | 14 |
| Height | 4.953mm |
| Length | 53.213mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF45K22-I/P Overview
There is a 40-DIP (0.600, 15.24mm) package available to save space. The way of Through Hole is used to mount it. You can find it in the package of Tube. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. There are 35 I/Os on it. In order to find similar components, it has a base part number of PIC18LF45K22. At DUAL, its terminals are located. 40 terminations are present in it. PIC? XLP? 18K is the series number of this electrical component. The supply voltage of 3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 40 pins. There are 40 pins on it. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 32kB. It performs extremely well at a frequency of 64MHz. In total, there are 7 timers and counters. It is a member of the PIC family of CPUs. There are a total of 36 programmable I/Os available. An oscillator type Internal is required for it to work.
PIC18LF45K22-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF45K22-I/P Applications
There are a lot of Microchip Technology PIC18LF45K22-I/P Microcontroller applications.
- Air fryers
- Fabric
- Vacuum cleaners
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Current meter
- Paper shredders
- DCS control intelligent sensor
- Accu-check
- Gas monitoring systems
- Security systems
